Select Page

Extreme Bypass Oil Filter Kits for Diesel and Gas Engines

Uncategorized

• Radically reduce engine wear by over 90%

• Extend oil and filter change intervals

• Ultra-fine 1 micron filtration

• Progressive 3 stage filtration that won’t clog or have to be constantly replaced like static–micron rated filters

• Keep oil up to 4X cleaner than new oil

• Significant removal of small particles, soot, and carbon buildup

• Eliminate expensive “blind” oil changes and save $$$

• Reduced cost of oil and full flow filters

• Improved oil cooling

• Increase in the fluid system capacity

• 100% water removal on the first pass – reduce acidity

• Reduce the erosion of hoses and seals caused by fine particles

• Easy installation and maintenance

• 15,000 miles, 250 hours, or 1 year before maintenance is needed

SPECIAL OFFER: SUBSCRIBE TO AN XFT “AUTOSHIP” AND SAVE 20% ON YOUR ORDER

How XFT Works

XFT is a comprehensive fuel treatment. Other products may have one or two of our components, but none have all of them.

It would take many products mixed together to even come close to giving you the same benefits as using XFT.

Organometalic Compound

A catalyst that ignites fuel at a lower temperature, providing a longer, more complete burn of the fuel. This causes the fuel to be used more efficiently, providing improved fuel economy and less wasted fuel out the exhaust, which reduces emissions. The organometallic compound burns more of the available BTUs of the fuel.

 

Polymerization Retardants

Reduces solids that form in the fuel tank and keep the engine clean, prolonging the life of all engine parts.

 

Demulsifiers

Helps separate water from fuel. A single drop of water can cause an injector to fail and damage the entire engine.

 

Lubricants

Reduces friction from pistons, pumps, and injectors, which would ultimately wear down the engine, therefore prolonging the engine’s working life.

Detergents

Cleans and maintains injectors, as well as the rest of the fuel system, so the engine works as efficiently as possible.

 

Rust & Corrosion Inhibitors

Removes and prevents rust in the fuel system, keeping it running efficiently.

Fuel Stabilizer

Stabilizes fuel to keep it from breaking down or deteriorating, and gives fuel a longer shelf life.

XFT Prolongs Engine Life

XFT uses a combination of ingredients that work together to keep your engine clean and running smoother. The result is that the moving parts of the engine and fuel system have less friction, run longer, work better, and cost much less to maintain.

XFT Improves Fuel Economy

Reduces fuel consumption, resulting in increased miles per gallon.

Our product saves you more money than the cost of your purchase, which means you drive further for less, converting each and every mile of those fuel savings into dollars in your pocket.

XFT Reduces Emissions

Reducing harmful pollutants from the exhaust pipe results in a cleaner environment.

Improving air quality and reducing carbon footprints is important for our future, and our children’s future. XFT is a green technology. This means by using our product you’ll be helping protect our planet from the negative effects caused by fuel emissions. Syntek Global customers regularly use XFT to help pass fuel emission tests.

XFT Increases Horsepower

Burns more of the available British Thermal Units (BTUs) in the fuel, resulting in better performance.

Your engine needs gas treatment to burn more BTUs and when it is allowed to do this you’ll experience more horsepower, it’s just that simple. More horsepower translates for many people into a more comfortable and greater reliability. Improved performance means high end luxury vehicles will operate beyond peak efficiency, and low end vehicles will feel strong and stable.

What Do Customers Say?

Hear what customers and distributors think of Xtreme Fuel Treatment and how XFT has helped to improve their lifestyle and their fuel economy. We challenge you to try a bottle of XFT today and see the results for yourself.

Affiliate Registration

Frequently Asked Questions

Will using the Xtreme Fuel Treatment void the engine manufacturer’s warranty?

No, Engine manufactures cannot discriminate against the use of a fuel additive. Under the terms of the Magnuson-Moss Warranty act, engine manufacturers must take the position that the use of a fuel additive does NOT void the engine warranty unless it can be proven that the specific additive was the cause of the failure. Manufactures may assert that the use of certain additives may prove useful.

What makes Xtreme Fuel Treatment different from all the other additives on the market?

Xtreme Fuel Treatment is a proven fuel treatment, used in the mining industry for the last 11 years. It is very concentrated; one gallon will treat 10,000 gallons of fuel. Not only does it have a combustion catalyst that will help increase fuel economy, Xtreme Fuel Treatment also has detergents, to remove harmful deposits from fuel pumps and injectors, lubricants to provide lubrication to pistons, fuel pumps, injectors and reduces friction, fuel stabilizers to prolong the life of stored fuel, polymerization retardant and dispersants to reduce sludge in fuel, rust and corrosion inhibitors to prevent fuel system corrosion and demulsifiers to help reduce water that forms in fuel.

Do I need to add the Xtreme Fuel Treatment on an empty tank?

Xtreme Fuel Treatment is made to disperse quickly into your complete fuel tank; it does not matter if you add the additive on an empty tank or a full tank. However, it makes more sense to add the additive before you begin pumping your fuel.

When I pour the additive into my tank, there seems to be some that sits on the metal flap of my gas tank inlet, what happens to that product?

The additive will only remain on the top of the inlet flap for a few seconds before seeping beyond the flap and down into the fuel tank. It is recommended that you add Xtreme Fuel Treatment before you begin to pump the fuel which helps disperse the additive throughout the fuel tank.

Is Xtreme Fuel Treatment classified as a hazardous material?

Xtreme Fuel Treatment is considered a non-hazardous material and can be shipped without specific hazardous warnings. The product MSDS (material safety data sheet) is available upon request. Medical treatment is necessary if product should be taken internally. Keep out of the reach of children.

How does Xtreme Fuel Treatment work?

Xtreme Fuel TreatmentTM contains and oil soluble, organo-metallic compound which functions as a ‘burn rate modifier’ and a ‘catalyst’ to lower the ignition point of fuel in the combustion chamber. It reduces the temperature of the burn from 1200F to 800F which increases the length of the time of the fuel burn. This results in a more complete burn of the available BTU’s of the fuel. The product also causes a reduction in the fuel droplet size that is injected into the combustion chamber, thus increasing the surface area available to be burned. This results in a more complete fuel burn, which adds horse power, increases mileage, reduces emissions and cleans the engine.

Can I use lower grades of fuel when using Xtreme Fuel Treatment?

The Xtreme Fuel Treatment formula allows you to use the lowest octane fuel without causing pings or lower engine performance.

What happens if I put more Xtreme Fuel Treatment in my tank than is recommended?

Over treating will not cause any negative effects on your engine. However, you will not get better results by using more of the formula. The recommended treatment rate has proven to provide the best results.

What does the EPA registration mean?

In order to get an EPA registration, a product must pass a three phase tier test. The purpose is to ensure the quality of the additive being used in combustion engines. It does not mean that the EPA endorses the product.

Will using your product damage my engine?

Xtreme Fuel Treatment has been specifically tested to ensure complete compliance with all standards and performance criteria. The product will not damage any engine.

Can I use the instrument panel in my vehicle that shows ‘miles to empty’ and MPG as a true measurement?

Most computers in today’s cars and trucks show an average of savings and can be calculated in a number of different ways. It is advised, before using Xtreme Fuel Treatment, to get a true MPG base line, by dividing the number of miles traveled by the gallons of fuel used. Then, once the additive is used, revaluate the savings by the same method. If you pull a boat or trailer you may have to remove the positive battery connection to reset the computer to get an accurate reading on your instrument panel.

Still Have Questions?

If after reading the Xtreme Fuel Treatment frequently asked questions you still need assistance contact us for help.

If you have additional questions about the product or about becoming a distributor please reach out to us by completing the form at the top of this page or by calling +1 (213) 514-5561 for customer support or distributor support.

Product Overview & Documentation

© 2020 Xtreme Fuel Treatment Review  |  All Rights Reserved